How To Runcomputer Through Pioneer Receiver

OVERLOCK

Materials: 5 sheets of white paper measuring 210 x 148 mm , cotton yarn, steel needle.

Procedure:

-find reference points for the stitching on the first page of the body to 5mm from the left edge to affix a sign in pencil and draw a line, put a sign on this line every 4 mm , puncture with a needle all the issues identified and finally erase the pencil marks;

-create the body of the paper and place underweight overflow leaving the left edge of the work plan a little more than 5mm;

-passing the needle with the thread from top to bottom starting from the first hole located a foot cut by drilling all the remaining sheets: in this first step is necessary to stop the motion so that the thread remains of a few cm above the entrance hole

-fall in the first hole with the same mode by pulling the thread completely

-create a knot in the thread Advanced during the first pass and that came from the second pass in the first hole

-enter the second hole from the top down, puncturing all the sheets below: The trend in yarn form a diagonal from the left edge and the second hole

-enter in the holes later with the same mode

-entering the last hole twice with puncturing pattern from top to bottom all the sheets below

-create a double knot to form a loop with an appropriate needle movement.

Characteristics of a suitable sewing overlock: Steps of yarn between the holes must be firm and not change position when touched or pinched fingers; nodes must be stable, taut.

The overlock stitch is suitable for various leaflets and archival material, is not suitable for restoration work.